Process plants run dozens of pipes in parallel - steam mains, cooling water, condensate, vent lines. Our multi-level pipe support racks keep them organized, supported and corrosion-protected for decades. The three-beam tiered design carries multiple lines in a compact footprint, with adjustable cantilever brackets that adapt to different pipe diameters without custom fabrication for every change.
Key Features
Multi-tier beam design: three horizontal beam levels carry multiple pipes simultaneously, freeing valuable floor space.
Adjustable cantilever brackets: bracket spacing and projection adjust to suit different pipe diameters and routing changes.
Anti-drop end slots: bracket ends feature retention slots that stop pipes from rolling off during installation or maintenance.
Full hot-dip galvanizing: immersion galvanizing stands up to acid and alkali exposure in chemical and pharmaceutical environments.
Typical Applications
Piping around chemical reactors and process vessels
Main steam and condensate distribution lines
Cooling water circulation systems
Cleanroom exhaust and ventilation ducting supports
Materials & Specifications
| Item | Specification |
|---|---|
| Material | Q235B carbon steel (equivalent to S235JR) |
| Corrosion protection | Hot-dip galvanized (AS/NZS 4680 compliant) |
| Tier count | 2 to 5 levels, custom to your pipe schedule |
| Bracket detail | Adjustable cantilever with anti-drop end slots |
| Welding | Welded per ISO 3834 qualified procedures |
Customization Options
Tier count from 2 to 5 levels based on the number of pipe runs
Insulated-cradle brackets for hot or cold-insulated piping
Vibration-damping pads for pump discharge lines
Custom bracket spacing to your pipe routing drawings
Why Source From Us
Qingdao Tianhua Yihe is a 7,000 m² metal fabrication plant with 20 years of OEM export experience, supplying welded steel structures to Australian and global customers. Our hot-dip galvanizing complies with AS/NZS 4680, and welding is qualified under ISO 3834 and AWS D1.1. Send your pipe schedule and routing layout for a detailed quotation.
Frequently Asked Questions
Q1: How many pipe levels can we order?
We build racks with 2 to 5 tiers. Send your pipe schedule and we will propose the tier count and spacing that keeps the rack compact while allowing room for insulation and maintenance access.
Q2: What pipe diameters do the brackets fit?
The cantilever brackets are adjustable and accept a wide range of diameters. For each line, tell us the outside diameter (including insulation if applicable) and we will configure the bracket spacing accordingly.
Q3: Will galvanizing survive a chemical plant environment?
Hot-dip galvanizing resists most acid and alkali exposures common in chemical, power and pharmaceutical plants. For aggressive media or splash zones, tell us the chemicals involved and we will advise on additional protection.
Q4: Can you support insulated pipes?
Yes. We can supply insulated-cradle brackets that carry the pipe load without crushing the insulation, plus wear pads at contact points.
Q5: Do you work from our piping layout drawings?
Yes. Send your routing layout or isometric drawings and we will produce a fabrication drawing for approval, then deliver the rack fully assembled or knocked down for container shipping.
Hot Tags: multi-level pipe support rack — adjustable cantilever bracket system, China multi-level pipe support rack — adjustable cantilever bracket system manufacturers, suppliers, factory
