Custom Sheet Metal Mounting Plates

Custom Sheet Metal Mounting Plates

Custom metal mounting plates for motors, gearboxes, pumps and equipment. Laser cut, drilled, tapped, countersunk and CNC machined to your bolt pattern and datums, in steel, stainless or aluminum. Prototypes from 1 pc in 5-7 days. ISO 9001:2015. Send your drawing.
Send Inquiry
Description
Technical Parameters

Qingdao Tianhua Yihe Foundry Factory is one of the leading manufacturers and suppliers of custom sheet metal mounting plates in China. We have world-leading production equipment and strong manufacturing capabilities. Please feel free to buy high quality customized products at competitive price from our factory.

 

Custom Sheet Metal Mounting Plates for Motors, Gearboxes, Pumps and Equipment Components

Qingdao Tianhua Yihe Metal Fabrication manufactures custom metal mounting plates to your drawings: motor and gearbox mounting plates, pump plates, component mounting plates, adapter plates and formed mounting brackets for OEM machinery. A mounting plate is an interface part. Its job is to put every bolt hole, locating hole and mounting face exactly where the mating components expect them. That means the bolt pattern, datum edges and flatness on the drawing matter more than the plate outline.

We cut, form, drill, tap, countersink and machine mounting plates as one controlled route, with 20+ years of OEM fabrication experience and an ISO 9001:2015 quality system. In-house processes cover laser cutting, bending, welding, CNC machining, grinding and assembly; surface finishing is done by qualified partner suppliers, managed and inspected by us.

Send your plate drawing with the mating component or bolt pattern reference and we will review datums, hole types and flatness before quoting. Request a mounting plate quote or email andywang@qdthyhmetalfab.com.

Motor and gearbox installed on a custom steel mounting plate on an equipment base frame

Typical Mounting Plates We Make

  • Motor and gearbox mounting plates with slotted holes for belt or chain tensioning
  • Pump and compressor mounting plates with tapped holes and machined pads
  • Adapter plates that match one bolt pattern to another
  • Component and sensor mounting plates for automation equipment
  • Formed mounting brackets and plates with flanges for stiffness or offset mounting

Set of laser-cut and bent sheet metal mounting brackets and plates with slots and hole patterns

Mounting Plate Fabrication Scope

Item Scope
Materials Carbon steel, galvanized steel, stainless steel and aluminum, grade and condition as specified on your drawing
Thickness and size According to your drawing; confirmed at drawing review
Hole features Laser-cut holes and slots, drilled, tapped and countersunk holes, self-clinching nuts and studs, machined locating holes and bores
Machining CNC milling of mounting faces, pads, pockets and locating holes where the drawing requires a finished feature
Forming and welding Bent flanges and stiffeners; welded studs, bosses or brackets where specified
Tolerances Drawing-based; feature-level tolerances and datum references reviewed for every plate
Finishes (partner suppliers, managed and inspected by us) Zinc plating, powder coating, painting, hot-dip galvanizing, anodizing for aluminum â€" with masking of mounting faces and threads as specified
Input files STEP, STP, IGES, DWG, DXF or PDF with revision and mating assembly reference
MOQ Prototypes from 1 piece; repeat production batches from the approved first article
Lead time Samples/prototypes 5â€"7 days; mass production 20â€"30 days, depending on complexity and quantity; confirmed on the quotation

Cut Holes vs. Machined Holes: Getting the Bolt Pattern Right

Laser-cut holes are fast and economical for clearance holes and slots. Locating holes, dowel holes, tight-fit bores and threads need drilling, reaming, tapping or milling after cutting. We separate these on the route sheet so each hole type gets the right process, and we reference all of them from the datum edges on your drawing.

Close-up of countersunk and tapped holes in a steel mounting plate

CNC milling of a steel mounting plate to machine the mounting face and locating holes

Have a bolt pattern to match? Upload your drawing or WhatsApp +86 138 6398 9651.

Quality Control and Documentation

  • Inspection points agreed around bolt patterns, datum edges and mounting faces.
  • First article inspection of hole positions, thread sizes and flatness of mounting faces.
  • Height gauge, calipers and pin gauges on a surface plate for hole position and size.
  • Material certificates and dimensional inspection reports for the agreed scope; EN 10204 3.1 availability confirmed for the purchased material.
  • Threads and finished faces protected for transport.

Dimensional inspection of a machined mounting plate with height gauge, caliper and pin gauges on a granite table

DFM Tips for Mounting Plates

  • Define datum edges. Dimension every hole from two datum edges or a primary locating hole, not chain-dimensioned from hole to hole, so tolerances do not stack.
  • Separate clearance holes from locating holes. Mark which holes only need bolt clearance and which locate the component; only the latter need machining.
  • Use slots for adjustment. Slotted holes for motor or belt tensioning reduce fit-up problems and are cheap to laser cut.
  • Choose thickness for flatness, not only strength. Thin plates can bow after cutting or welding. If the mounting face must be flat, allow a machining pad or a slightly thicker plate.
  • Specify thread type and depth. Choose tapped holes for thick plates and self-clinching nuts for thin sheet, and state metric or imperial threads clearly.
  • Mask mounting faces. Show masking for faces, threads and grounding points so coating does not affect fit or conductivity.

From Drawing Review to Delivery

  1. Submit drawings, specifications and quantity.
  2. We clarify material, hole types, datums and inspection scope.
  3. Quotation and approved manufacturing requirements confirmed.
  4. Prototype or first-article approval where needed.
  5. Production with the agreed inspection plan.
  6. Packing that protects threads and finished faces.

Finished steel mounting plates stacked with cardboard separators and strapped on a wooden pallet

MOQ and lead time: prototypes from 1 piece. Samples and prototypes take 5â€"7 days; mass production takes 20â€"30 days, depending on complexity and quantity, and is confirmed on the quotation. Surface finishing is carried out by qualified partner suppliers, managed and inspected by us.

FAQ: Custom Metal Mounting Plates

Should holes in a mounting plate be laser cut or machined?

Clearance holes and slots can usually be laser cut. Locating holes, dowel holes, tight-fit bores and threads should be drilled, reamed, tapped or milled. Mark the hole type on the drawing and we will route each one accordingly.

How do you keep a mounting plate flat?

Flatness depends on thickness, cutting heat, welding and coating. For critical faces we can machine pads after fabrication. Tell us the flatness requirement so it is reviewed before quoting.

Can you match an existing motor or pump bolt pattern?

Yes. Send the drawing or the component model or data sheet reference and we will confirm the pattern and datums with you before production.

Can the plate be supplied coated with masked threads?

Yes. Coatings are applied by qualified partner suppliers to your specification and inspected by us, with threads, mounting faces and grounding points masked as shown on the drawing.

What are the MOQ and lead time for mounting plates?

Prototypes are accepted from 1 piece. Samples and prototypes take 5â€"7 days; mass production takes 20â€"30 days, depending on complexity and quantity. The exact lead time is confirmed on the quotation.

Related Products

Send your mounting plate drawings for review and a quote. Request a quote or email andywang@qdthyhmetalfab.com.

Hot Tags: custom sheet metal mounting plates, China custom sheet metal mounting plates manufacturers, suppliers, factory

START YOUR OEM PROJECT

Our seasoned technical sales managers are ready to collaborate closely with you. They will take into account your customized requirements, order quantity, and delivery specifics to determine the most suitable quotations tailored to your business. For accurate cost checking, we kindly request that you provide as much detailed information as possible. Rest assured, we will get back to you within 2 hours.

Benefit You Can Get By Partnering With Us

  • Certified Quality
  • ODM Innovation
  • Stable Supply Chain
  • OEM Services
  • Automatic Production Line
  • Multiple Technology Patents
  • Favorable Price
  • Fast Delivery

Send Your Drawings for a Quote