Custom Heavy-Duty Steel Gusset Plates & Welded Structural Brackets

Custom Heavy-Duty Steel Gusset Plates & Welded Structural Brackets

Custom steel gusset plates and heavy-duty welded brackets for machine frames, skids and equipment bases. 3-50 mm plate, laser cut, beveled, drilled and MIG/TIG welded to your drawing; galvanizing via partners. Prototypes from 1 pc. ISO 9001:2015. Send drawings.
Send Inquiry
Description
Technical Parameters

Qingdao Tianhua Yihe Foundry Factory is one of the leading manufacturers and suppliers of custom heavy-duty steel gusset plates & welded structural brackets in China. We have world-leading production equipment and strong manufacturing capabilities. Please feel free to buy high quality customized products at competitive price from our factory.

 

Custom Steel Gusset Plates and Heavy-Duty Welded Brackets for Machinery and Equipment Frames

Qingdao Tianhua Yihe Metal Fabrication manufactures custom steel gusset plates, stiffener plates and heavy-duty welded brackets for OEM machinery: equipment base frames, skids, chassis, conveyor structures, lifting and handling equipment, agricultural and construction machinery. A gusset looks simple, but it decides whether a frame corner stays square under vibration and load. Plate profile, hole position, weld access, corner clips and distortion control all have to be right for the joint to perform as designed.

We cut, bevel, drill, form and weld gusset plates and bracket assemblies strictly to your engineering drawings, with surface finishing by qualified partner suppliers that we manage and inspect, with 20+ years of OEM fabrication experience and an ISO 9001:2015 quality system. Our focus is equipment and machinery parts, not building steel structures.

Send your plate or weldment drawing with weld symbols and we will review weld access, hole positions and distortion risk before quoting. Request a gusset quote or email andywang@qdthyhmetalfab.com.

Custom laser-cut steel gusset plates and welded mounting brackets with bolt hole patterns on a layout table

Typical Gusset Plates and Heavy Brackets

  • Triangular and trapezoidal gussets for frame corners and column-to-base joints
  • Stiffener and rib plates for machine bases and skids
  • Welded L- and T-brackets for motors, pumps, gearboxes and cylinders
  • Base-frame corner plates and foot plates for skids and machine bases
  • Multi-plate welded bracket assemblies with machined bores
  • Gusseted mounting brackets for conveyors and handling equipment

Welded steel gusset plate reinforcing a tube-to-beam joint on an equipment frame

Plate Fabrication and Welding Capabilities

Item Capability
Materials Carbon steel ASTM A36, Q235B, Q355B, S275JR, S355JR; stainless 304 / 316L; other grades such as weathering or wear plate on request
Plate thickness 3â€"50 mm (0.118"â€"2.00"); thicker plate reviewed per drawing
Cutting CNC fiber laser cutting; other thermal cutting methods for heavy plate where suitable
Cutting tolerance Laser-cut profiles to drawing; achievable tolerance depends on plate thickness. Bores and pin holes needing tight fits are machined after cutting or welding
Edge preparation Deburring, descaling, single/double bevels (V, K groove), countersinking, drilling, tapping
Welding GMAW (MIG/MAG), GTAW (TIG), FCAW; multi-pass fillet and groove welds to your weld symbols and specified code
Finishes Supplied oiled, or shot blasted, primed, powder coated or hot-dip galvanized by qualified partner suppliers, managed and inspected by us
Inspection Dimensional check on surface plate, calipers, pin gauges; NDT such as UT or MT on request
MOQ Prototypes from 1 piece; repeat production batches from the approved first article
Lead time Samples/prototypes 5â€"7 days; mass production 20â€"30 days, depending on complexity and quantity; confirmed on the quotation

CNC fiber laser cutting steel plate for gusset and bracket profiles

Welding and Distortion Control

Heavy gussets pull frames out of square if welding is not planned. We tack and fit in fixtures, balance weld sequences on both sides of the joint, and straighten after welding where needed. Bores, mounting faces and pin holes that must line up across a weldment are best machined after welding; we will recommend this when the drawing tolerances call for it.

Close-up of a multi-pass fillet weld on a 16 mm steel gusset plate

Have a weldment to quote? See our welded structural parts capability, or upload drawings now. WhatsApp +86 138 6398 9651.

Quality Control and Documentation

  • Material grade checked against mill certificates at receiving.
  • First article inspection of profile, hole positions and thickness.
  • Visual weld inspection against your weld symbols; weld size checked with gauges.
  • Squareness and flatness of welded brackets checked on a surface plate.
  • NDT (UT or MT) on request, plus material certificates and dimensional reports for the agreed scope.

Dimensional inspection of a triangular steel gusset plate on a granite surface plate

DFM Tips for Gusset Plates and Welded Brackets

  • Clip the inside corner. Add a corner clip (snipe) where the gusset meets the fillet welds of the members, so welds do not cross and the weld can run around the end.
  • Hole-to-edge distance. Keep at least 1.5 Ã- plate thickness between hole edge and plate contour to avoid distortion and weak edges.
  • Bevel thick plates under dynamic load. For plates over about 12 mm carrying heavy or cyclic loads, specify single or double bevels for full penetration instead of oversized fillets.
  • Vent and drain for galvanizing. Add vent/drain holes (about Ø10 mm or larger) to closed pockets so zinc can flow and parts are safe to dip.
  • Design to stock thickness. Common plate sizes (6, 8, 10, 12, 16, 20, 25 mm) are faster to source than odd gauges.
  • Machine after welding where fits matter. Mark bores and faces that need post-weld machining; cut holes alone will move during welding.

How to Order

  1. STEP/IGES and/or DWG, DXF or PDF drawings with revision.
  2. Material grade, plate thickness and welding code or acceptance criteria.
  3. Weld symbols, critical dimensions and features to machine after welding.
  4. Finish, NDT and documents required.
  5. Quantity per part number and handed (left/right) quantities.

Finished heavy steel gusset plates separated by wooden laths and strapped on an export pallet

MOQ and lead time: prototypes from 1 piece. Samples and prototypes take 5â€"7 days; mass production takes 20â€"30 days, depending on complexity and quantity, and is confirmed on the quotation. Surface finishing is carried out by qualified partner suppliers, managed and inspected by us.

FAQ: Custom Steel Gusset Plates

What thickness of gusset plate can you produce?

We regularly process plate from 3 mm to 50 mm. Thicker plate can be reviewed against the drawing and the cutting method.

What tolerance can you hold on laser-cut gusset plates?

Laser-cut profiles are made to your drawing tolerance; what is achievable depends on plate thickness. For bores or pin holes that need close fits, we recommend machining, which we confirm during review.

Can you weld gussets to my frame or bracket assembly?

Yes. We supply loose plates, kitted sets or fully welded bracket assemblies, welded to your weld symbols and the code or acceptance criteria you specify.

Do you supply hot-dip galvanized gusset plates?

Yes, when specified. Hot-dip galvanizing is done by a qualified partner galvanizer and managed and inspected by us. Add vent and drain holes to closed sections and tell us the coating standard you need.

Can you provide material certificates and NDT reports?

Material certificates are supplied with the order. UT or MT testing can be arranged on request; agree the scope and acceptance criteria in the quotation.

What are your MOQ and lead time for gusset plates?

Prototypes are accepted from 1 piece. Samples and prototypes take 5â€"7 days; mass production takes 20â€"30 days, depending on complexity and quantity. The exact lead time is confirmed on the quotation.

Related Products

Get your gusset plates and welded brackets reviewed and quoted. Send drawings or email andywang@qdthyhmetalfab.com.

Hot Tags: custom heavy-duty steel gusset plates & welded structural brackets, China custom heavy-duty steel gusset plates & welded structural brackets manufacturers, suppliers, factory

START YOUR OEM PROJECT

Our seasoned technical sales managers are ready to collaborate closely with you. They will take into account your customized requirements, order quantity, and delivery specifics to determine the most suitable quotations tailored to your business. For accurate cost checking, we kindly request that you provide as much detailed information as possible. Rest assured, we will get back to you within 2 hours.

Benefit You Can Get By Partnering With Us

  • Certified Quality
  • ODM Innovation
  • Stable Supply Chain
  • OEM Services
  • Automatic Production Line
  • Multiple Technology Patents
  • Favorable Price
  • Fast Delivery

Send Your Drawings for a Quote