Qingdao Tianhua Yihe Foundry Factory is one of the leading manufacturers and suppliers of custom stainless steel sheet metal parts & welded enclosures (304 / 316l) in China. We have world-leading production equipment and strong manufacturing capabilities. Please feel free to buy high quality customized products at competitive price from our factory.
Custom Stainless Steel Sheet Metal Parts and TIG-Welded Enclosures in 304 and 316L
Qingdao Tianhua Yihe Metal Fabrication fabricates custom stainless steel sheet metal parts for OEM equipment makers: electrical enclosures, machine guards, brackets, drip trays, hoppers, conveyor funnels and fluid containment boxes in AISI 304, 304L, 316 and 316L. Stainless rewards care and punishes shortcuts. Scratched brushed faces, heat tint around welds, cracked bends and free iron left on the surface all show up later as rust or rejected parts. Our process is set up to keep the finish, the welds and the corrosion resistance intact from cutting to packing.
We bring 20+ years of OEM fabrication experience and an ISO 9001:2015 quality system to food processing, packaging, pharmaceutical, chemical, water treatment and marine equipment programs.
Send your drawing and tell us the environment (washdown, chlorides, outdoor) and we will confirm grade, finish and weld details before quoting. Request a stainless quote or email andywang@qdthyhmetalfab.com.

Stainless Steel Parts We Make
- TIG-welded stainless enclosures, junction boxes and control housings
- Machine guards, hoods and covers for washdown areas
- Drip trays, drain pans, funnels, chutes and hoppers
- Formed brackets, mounting plates and frames in 304/316L
- Fluid containment boxes with internal baffles and drain bosses

Where Our Stainless Parts Are Used
Food and beverage equipment: guards, hoods, drip trays and frames that see daily washdown. Packaging machinery: brushed covers and enclosures where appearance matters. Water treatment and chemical dosing: 316L housings, brackets and containment boxes. Marine and outdoor equipment: enclosures and mounting hardware exposed to salt air. For each application, tell us the cleaning chemicals and exposure so we can recommend grade, finish and weld treatment rather than guess.
Stainless Fabrication Capabilities
| Item | Capability |
|---|---|
| Grades | AISI 304 (1.4301), 304L (1.4307), 316 / 316L (1.4401 / 1.4404); 430 and 201 for non-critical parts on request |
| Thickness | 0.8â€"6.0 mm for laser cutting and bending; heavier stainless plate up to 12.0 mm reviewed per part |
| Typical tolerances | Laser cutting ±0.1 mm, press brake bending ±0.2 mm; tighter features such as pin holes by machining where the drawing requires |
| Welding | GTAW (TIG) and handheld fiber laser welding; seams ground and blended where specified |
| Surface finishes | Sheet supplied 2B or No. 4 brushed/satin with protective film; bead blasting, passivation, electropolishing and mirror polishing carried out by qualified partner suppliers, managed and inspected by us |
| Hardware | Stainless self-clinching studs and standoffs, blind rivet nuts, weld studs, piano hinges, quarter-turn locks |
| Inspection | Dimensional check on surface plate, height gauge, pin gauges; dye penetrant testing of welds on request |
| Documents | Material certificates (EN 10204 3.1 where available from the mill), dimensional report for agreed features |
| MOQ | Prototypes from 1 piece; repeat production batches from the approved first article |
| Lead time | Samples/prototypes 5â€"7 days; mass production 20â€"30 days, depending on complexity and quantity; confirmed on the quotation |
Keeping Welds Clean and Corrosion-Resistant
We TIG weld stainless with argon shielding and controlled heat input, and use pulse settings, laser welding and heat sinks on thin sheet to limit distortion. After welding, heat tint is removed and, where you specify it, parts are passivated by our qualified partner supplier to restore the chromium-oxide layer, then inspected by us. Tools and work surfaces used for stainless are kept separate from carbon steel to avoid iron contamination.


Need a stainless enclosure or guard? Upload your drawings or WhatsApp +86 138 6398 9651.
Quality Control
- Grade verified against the material certificate at receiving.
- Protective film kept on cosmetic faces through cutting and bending.
- First article inspection of dimensions, bends and weld appearance.
- Visual weld inspection; dye penetrant testing for leak-critical seams on request.
- Final check of finish, cleanliness and hardware before packing.

DFM Tips for Stainless Steel Sheet Metal
- Use an inside bend radius of at least 1 Ã- thickness. Tighter radii risk micro-cracking on the outside of the bend, especially in 316L.
- Specify grain direction for brushed parts. Show the brush direction on the drawing so all panels in an assembly match.
- Choose 316L for chlorides. For washdown with chlorinated cleaners, coastal or marine exposure, 316L costs more but avoids pitting seen on 304.
- Design out crevices. For hygienic equipment, prefer continuous welds and open, drainable corners over lap joints and stitch welds that trap fluid.
- Call out passivation. Specify passivation (for example to ASTM A967) for parts exposed to washdown or marine atmospheres.
- Keep holes away from bends. At least 2.5 Ã- thickness + bend radius from the bend line prevents distortion.
How to Order
- STEP/IGES and/or DWG, DXF or PDF drawing with revision.
- Grade, thickness, surface finish and brush direction.
- Weld requirements: continuous or stitch, ground flush or as-welded, leak-tight or not.
- Post-treatment: passivation, electropolishing, bead blasting.
- Quantity, prototype needs and required documents.

MOQ and lead time: prototypes from 1 piece. Samples and prototypes take 5â€"7 days; mass production takes 20â€"30 days, depending on complexity and quantity, and is confirmed on the quotation. Surface finishing is carried out by qualified partner suppliers, managed and inspected by us.
FAQ: Custom Stainless Steel Sheet Metal Parts
Should I choose 304 or 316L stainless steel?
304 suits most indoor and general washdown equipment. Choose 316L when parts see chlorides, salt air, aggressive cleaning chemicals or will be heavily welded, since the low carbon content reduces weld-zone corrosion risk.
How do you control distortion when welding thin stainless?
We use pulse TIG or fiber laser welding, heat sinks, balanced weld sequences and fixturing to limit heat input, then straighten and finish as required.
Do you passivate stainless parts after welding?
Yes, when specified on the drawing. Passivation is carried out by a qualified partner supplier and managed and inspected by us. Tell us the standard you require so it is quoted and documented correctly.
Can you protect a brushed finish during fabrication?
Yes. Brushed sheet is processed with protective film on the cosmetic face, which stays on until final cleaning or can be left on for shipping.
Do you provide material certificates for 304/316L?
Yes, material certificates are supplied with the order. Tell us if you need EN 10204 3.1 specifically so we confirm it for the purchased material.
What are your MOQ and lead time for stainless parts?
Prototypes are accepted from 1 piece. Samples and prototypes take 5â€"7 days; mass production takes 20â€"30 days, depending on complexity and quantity. The exact lead time is confirmed on the quotation.
Related Products
- Custom machine enclosure panels and access doors
- Custom aluminum sheet metal parts
- Custom welded structural parts for OEM equipment
Get a DFM review for your stainless parts. Send drawings or email andywang@qdthyhmetalfab.com.
Hot Tags: custom stainless steel sheet metal parts & welded enclosures (304 / 316l), China custom stainless steel sheet metal parts & welded enclosures (304 / 316l) manufacturers, suppliers, factory







