Custom Welded Vibrating Screen Support Frame | Fatigue-Detailed Welds

Custom Welded Vibrating Screen Support Frame | Fatigue-Detailed Welds

Vibrating screen support frames and sub-frames welded for cyclic load: radiused gusset ends, wrapped weld terminations, full penetration joints where your drawing calls for them, spring seats to your isolator layout. In-house stress relief and machining. ISO 9001:2015, first frame in 5-7 days.
Send Inquiry
Description
Technical Parameters

Qingdao Tianhua Yihe Foundry Factory is one of the leading manufacturers and suppliers of Custom Welded Vibrating Screen Support Frame | Fatigue-Detailed Welds in China. We have world-leading production equipment and strong manufacturing capabilities. Please feel free to buy high quality customized products at competitive price from our factory.

 

A screen frame can pass every dimensional check, ship on time and still crack at a gusset toe before the end of its first season. Vibrating equipment punishes details that a static frame would never notice: a square gusset corner, a fillet weld stopped short in the middle of a member, an arc strike left on a flange. A vibrating screen support frame sees millions of load reversals a year, so fatigue, not strength, sets its life.

Our shop in Qingdao has been welding equipment frames for more than 20 years, mostly for OEMs in Europe and the US who send us full drawings. For screen frames we spend more time at the drawing stage than on most parts, because that is where cracks are prevented.

Why screen frames crack where they do

Fatigue cracks start at stress raisers and grow from there. On screen support structures the usual starting points are predictable:

  • the toe of a fillet weld where a gusset ends abruptly
  • a weld termination in the middle of a main member, instead of wrapped around the end of the attachment
  • an unfused root on a one-sided fillet that carries primary load
  • holes or notches cut close to welded joints
  • spring seat plates welded with intermittent stitches

None of these show up in a static load calculation. All of them show up in the field.

Weld details we look for on your drawing

When a screen frame drawing comes in, we check the weld callouts against the duty. Where a primary joint is drawn as a fillet, we ask whether full penetration was intended. Where a gusset is drawn with a square end, we suggest a radius or taper. You stay in control of the design; we simply point out where fabrication practice and fatigue life pull in different directions.

On the shop floor, full penetration joints are prepared with a bevel, welded from one side, back-gouged to sound metal and welded from the other. Weld ends are wrapped. Start and stop points are kept away from the most highly stressed zones, and spatter and arc strikes are ground off.

Plate, sections and vibrating screen support frame stiffness

Most screen support frames we build are Q235B or Q345B, equivalent to S235JR and S355JR. Frame stiffness and mass feed into the isolation design done by you or your isolator supplier, so we build the sections exactly as drawn and mark each spring seat with its position number. Changing a channel for a lighter one to save cost would change the natural frequency, and that is a decision for your engineer, not for us.

For large frames we stress relieve in-house before any machining of spring seats or bearing mounting faces. It reduces residual stress at the welds and keeps machined surfaces where they were cut.

Inspection and NDT options

Every frame is checked for diagonals, squareness and spring seat positions against the drawing, and welds are inspected visually for profile, undercut and terminations. Magnetic particle, dye penetrant or ultrasonic testing can be arranged on request; agree the seams and acceptance criteria on the quotation and the reports travel with the shipment.

Getting a large frame to site

Screen sub-frames are often wider than a container door. We can split frames into bolted sections where your design allows, add temporary bracing for transport, and fix lifting points that match your installation drawing. Tell us how the frame will travel and we will plan it before welding, not after.

Spare frames and replacement programmes

Mining and quarry operators often need a replacement support frame for a screen that has been running for years. If the original drawings are lost, a site survey with key dimensions and spring seat positions is enough for our engineers to prepare a new drawing, and the review is a good moment to improve fatigue details that caused the old frame to crack. Once approved, a single vibrating screen support frame can be built as a one-off, with in-house stress relief and inspection, and the drawing stays on file for the next replacement.

Questions about screen support frames

Will you change our weld details?

Not without your approval. We comment on details that are fatigue-sensitive and you decide.

Can you test the welds?

Yes. MT, PT or UT can be arranged for the seams you specify, with written reports.

Do you build replacement frames from worn originals?

Yes, if you can supply key dimensions or a survey. We will turn it into a drawing for your approval before fabrication.

Send your screen frame drawing and the isolator layout to our quote desk. For other parts that live under vibration, see our fan and blower support bases or the wider range of heavy plate welding work.

Hot Tags: Custom Welded Vibrating Screen Support Frame | Fatigue-Detailed Welds, China Custom Welded Vibrating Screen Support Frame | Fatigue-Detailed Welds manufacturers, suppliers, factory

START YOUR OEM PROJECT

Our seasoned technical sales managers are ready to collaborate closely with you. They will take into account your customized requirements, order quantity, and delivery specifics to determine the most suitable quotations tailored to your business. For accurate cost checking, we kindly request that you provide as much detailed information as possible. Rest assured, we will get back to you within 2 hours.

Benefit You Can Get By Partnering With Us

  • Certified Quality
  • ODM Innovation
  • Stable Supply Chain
  • OEM Services
  • Automatic Production Line
  • Multiple Technology Patents
  • Favorable Price
  • Fast Delivery

Send Your Drawings for a Quote