Welded Compressor Mounting Base Assembly | Isolator Pads, Pipe Supports

Welded Compressor Mounting Base Assembly | Isolator Pads, Pipe Supports

Compressor mounting bases and package skids welded to your drawing: isolator pads milled to one height in-house, compressor, motor, enclosure and pipe supports drilled from one datum, trial fit of isolators on request. Qingdao fabricator, 20+ years, ISO 9001:2015.
Send Inquiry
Description
Technical Parameters

Qingdao Tianhua Yihe Foundry Factory is one of the leading manufacturers and suppliers of Welded Compressor Mounting Base Assembly | Isolator Pads, Pipe Supports in China. We have world-leading production equipment and strong manufacturing capabilities. Please feel free to buy high quality customized products at competitive price from our factory.

 

A discharge flange that keeps weeping after every retightening is often blamed on the gasket. On packaged compressors it is just as often the steel: a pipe support a few millimetres off, so the piping hangs on the compressor flange, or isolator pads at different heights, so the whole package rocks slightly under load. A compressor mounting base decides how well everything bolted to it behaves.

We fabricate bases and skids for screw, reciprocating and refrigeration compressor packagers who work to their own drawings. For over 20 years our role has been to build those drawings accurately, machine what needs machining in our own shop, and tell the customer early when a detail is likely to cause trouble.

One datum for the whole package

A compressor package is several suppliers' equipment sharing one piece of steel: compressor, motor, oil separator, cooler, control panel, enclosure. If each is dimensioned from a different edge of the base, the tolerances stack up and something will not fit. We ask for, and drill to, a single coordinate system. Every hole for the compressor feet, motor feet, isolators, enclosure posts and pipe supports is positioned from the same datum, usually the compressor shaft centreline or a machined reference edge.

Isolator pads on a compressor mounting base

Anti-vibration mounts only work as intended when they are loaded evenly. Pads at different heights put some isolators in heavy compression and leave others nearly idle, and the package then transmits exactly the vibration the mounts were bought to stop. On a compressor base we:

  1. weld the isolator pads in a fixture after the main frame is complete
  2. stress relieve heavy frames in-house so the pads stay put
  3. mill all isolator pads in one plane in our own machine shop
  4. trial fit the isolators on request and mark each position

Example: a packaged screw compressor skid

A common order is a channel-frame skid for an oil-injected screw compressor with motor, separator tank and aftercooler. The drawing shows the compressor and motor on a common sub-frame sitting on four isolators, with the enclosure posts bolted to the outer frame. In our DFM reply we might point out that two pipe support brackets can only be welded after the sub-frame is fitted, and propose a weld sequence. After approval we build the outer frame and sub-frame, machine the isolator pads and motor pads, trial fit the isolators, and send photos and a dimensional report before shipping. The paint is applied by our finishing partner to the RAL colour on the drawing.

Drawing checklist for compressor bases

  • Compressor, motor and isolator models or outline drawings
  • Isolator positions and pad sizes
  • Pipe support and cooler support locations from the piping layout
  • Enclosure post pattern
  • Faces to be machined, with a datum
  • Lifting lug positions rated for the assembled package
  • Finish and colour
  • Required documents, for example material certificates and a dimensional report
  • Annual quantity, since fixtures for repeat packages are worth building

With this list complete, our engineers can usually send a firm price and a DFM comment sheet within a couple of working days. Missing items do not stop the quote; they simply appear on the comment sheet as open questions.

Lifting the assembled package

A compressor package is lifted far more often than people expect: off the truck, into the plant, onto the plinth, and out again at overhaul. Lifting lugs on a compressor mounting base should be rated by your engineer for the complete package weight with oil, and positioned so the package hangs level. Forklift pockets need top and bottom plates or the forks will dent the channel. We weld lugs and pockets where the drawing shows them and mark the lifting points clearly.

Compressor base FAQs

Do you mill the isolator pads?

Yes, after welding, in our own shop, so the isolators load evenly.

Can you add mass to the base for a reciprocating compressor?

Base mass and stiffness are your engineer's call. If the drawing shows extra plate or a concrete-fill box, we build it as drawn.

Can you trial fit the isolators before shipping?

Yes, on request. Each isolator position is marked so the installer does not have to guess.

Is there a minimum order?

No. We build single prototypes, which typically ship in 5-7 days, and batches of the same design in 20-30 days.

Compressor packagers can send drawings for a quote here. We also build generator base frames and welded fan and blower bases with the same single-datum approach.

Hot Tags: Welded Compressor Mounting Base Assembly | Isolator Pads, Pipe Supports, China Welded Compressor Mounting Base Assembly | Isolator Pads, Pipe Supports manufacturers, suppliers, factory

START YOUR OEM PROJECT

Our seasoned technical sales managers are ready to collaborate closely with you. They will take into account your customized requirements, order quantity, and delivery specifics to determine the most suitable quotations tailored to your business. For accurate cost checking, we kindly request that you provide as much detailed information as possible. Rest assured, we will get back to you within 2 hours.

Benefit You Can Get By Partnering With Us

  • Certified Quality
  • ODM Innovation
  • Stable Supply Chain
  • OEM Services
  • Automatic Production Line
  • Multiple Technology Patents
  • Favorable Price
  • Fast Delivery

Send Your Drawings for a Quote